Zipper Ends : 5 pack - Available in 6 metal finishes
Metal Zipper Ends. Sold in a pack of 5.
- 10mm wide x 17mm long x 5 mm high
- Trim the zipper tails off so they are just beyond the metal stops at the end of the zipper (sometimes it is helpful to put in a couple whip stitches right by the metal stops to sew the open end closed.)
- Then fold one side of the zipper tape to the back, and then the other. Slide it in the zipper end for fit. Fits good? Then pull it out and get the screw started a bit. I put some glue inside that adheres to metal and fabric, such as Beacon 3-in-1, E-6000, or some Aleene'sproducts.
- Refold and slide it back in, and screw the screw in all the way. If you are using a wide zipper, it might have a very large end stop, sometimes that needs to be cut off to fit, or the wider zipper tapes need to be trimmed a bit.