The Tulip Duo Pouch wristlet is a quick, easy project. There are 3 parts to this pattern: a wrist strap, a barrel pouch, and a card pouch. You can make the entire set or just one of the components of the pattern.
The barrel pouch has a double pull zipper which opens all the way down both sides with gussets to prevent items from falling out when open.
The card pouch has a front exterior zipper pocket and 6 card slots inside the main zipper compartment.
This pattern includes:
pattern pieces for all pieces except strap pieces
cutting chart
photos showing the naming convention for all pieces
free video tutorial (see below)
SUPPLIES:
Barrel Pouch:
11” W x 10” H Exterior fabric 14” W x 10” H Lining fabric
If using fabric for Exterior and Lining: 24” W x 10” H Fusible woven interfacing 11” W x 10” H Fusible fleece
Notions:
6” webbing, 1/2” Wide ***See note below(1) 1/2” swivel clasp (1) 11” zipper tape (#5, #4.5) with double pulls 15” of 3/4” wide fold over elastic (FOE)
12” webbing (or length of choice), 1” wide 2 1/4” W x 3” H Exterior fabric for WRIST STRAP CASING (interfaced with fusible woven interfacing if using fabric) (1) 1” D-ring
For 1.5” wide strap:
12” webbing (or length of choice), 1.5” wide 3” W x 3” H Exterior fabric for WRIST STRAP CASING (interfaced with fusible woven interfacing if using fabric) (1) 1.5” D-ring OR O-ring
Other supplies:
Double-sided tape (DST) in 1/4” and 1/2” width.
*** If you are unable to find 1/2” wide webbing, you can use cork/vinyl or interfaced fabric instead. Cut pieces 1” wide x length mentioned for each pouch.
SEWING EXPERIENCE: If using the materials suggested in the pattern, there is little to no interfacing and the project can be finished very quickly once all pieces are cut. It will take approximately 1 hour to cut all the pieces and 1-2 hours to sew based on experience. This is a perfect project for a confident beginner.
