Cart 0

The Trillium Tote Bag - PDF Sewing Pattern

$8.00 CAD

The Trillium tote bag is a larger sized bag with 2 exterior side pockets, a U shaped band, corners and double shoulder straps in faux leather, vinyl or real leather depending on your preference. There are piping accents on the top edge of the exterior pockets as well as the 4 side seams. On the inside, there are 2 large slip pockets and 1 zippered pocket. The bag stays closed with a magnetic snap.

SUPPLIES:


Exterior fabric:
1 yard exterior fabric
¼ to ½ yard faux leather/vinyl (depending on width)


Lining fabric:
1.5 yards of lining fabric


Interfacing:
1.5 yards interfacing for exterior (sew-in or fusible depending on your preference. Amount will vary depending on what you use)
1 yard lightweight fusible interfacing
1 piece of Peltex sew-in interfacing 15” W x 5” H for bag bottom
scrap pieces of duck canvas or Peltex to reinforce
magnetic snap installation


Notions:
(4) 1 inch O rings
(1) 8-inch zipper
(1) 18 mm magnetic snap
74” of piping
Double sided tape (DST) optional but highly
recommended

 

MEASUREMENTS:
Side Panel Width at bottom: 4.5 inches (11.43 cm) increasing to 6.5 inches (16.5 cm) at top
Height up to top of U band: 9.75 inches (24.8 cm)
Width at bottom: 14 inches (35.6 cm)
Strap Length: 26 inches (66 cm) total with a drop of 17 inches (43 cm) to top of U band (you can adjust length as desired!)

 

SEWING EXPERIENCE: This project is best suited for intermediate sewers but a confident beginner could give it a try. It is probably at least a 3 hour project.
PLEASE NOTE: This pattern is in ENGLISH only.

Share this Product